Negative-grain Anti-slip Film Faced Plywood
Anti-slip (F/W) plywood can be used on the floor of trailers, trucks, and rail vehicles. In addition to the transportation industry, our special products with non-slip surfaces are also used to build warehouses, loading and unloading platforms, scaffolding, and playground floors. Anti-slip plywood has found application in the shipbuilding industry for the deck of RORO ships.
Sulong non-slip plywood is produced on the basis of our birch plywood. Durability, strict thickness tolerances and tape resistance make this basic plywood very popular.
As a supplier of high-quality non-slip plywood, Sulong Group guarantees that the material has maximum slip resistance, minimum rolling wear (rolling test) and high wear resistance (Taber test).
Because the veneer is coated with a film, only the defects of the lamination are considered when grading. In addition, obvious defects on the outside of the wood are also taken into account. Each side of the panel, whether non-slip or smooth, corresponds to one of the following grades. I, II or III.
The waterproof coating has different colors and densities. The edges of the panel are sealed with waterproof acrylic paint.
It is planned to launch the production of non-slip laminated plywood with hexagonal pattern in the second half of the year.
You can contact our manager and buy non-slip plywood directly from the manufacturer.
Film faced plywood is a waterproof plywood manufactured for concrete shuttering and forming. Phenolic film faced plywood is suitable for multiple uses, cheap, easy to clean and cut, thus intensively used by the formwork industry.
Sulong Wood is a major manufacturer of film faced plywood in China. We own the brand name SULONG.
Sulong film faced plywood is manufactured with quality veneers with a WBP glue that can withstand harsh weather and rain. Both surfaces of the plywood are coated with a phenolic film overlay and the four edges are sealed with waterproof paint.
Common trade names are phenolic board, formply, formwork plywood, phenolic film faced plywood, black marine plywood, MDO HDO overlay plyform, PSF plywood, Tego ply, etc.
Most popular film faced plywood are 1220x2440x18mm and 1220x2440x12mm with black/brown film on both faces of the panel.
|Size||1220*2440mm, 1250*2500mm, 1200*2400mm|
|Thickness||12mm 15mm 17mm 18mm 21mm|
|Core Veneer||Finger Joint Core, Poplar Core, Eucalyptus Core, COMBI MIX Core.|
|Face & Back||Black Film, Brown Film, Red Film, Dynea Brand Film|
|Adhesive||WBP Melamine, WBP Phenolic|
|Density||Finger Joint Core 550kgs/m3, Poplar Core 520kgs/m3, Eucalyptus Core 600kgs/m3|
|MOQ||1000 sheets for 18mm. 1200 sheets for 15mm. 1500 sheets for 12mm.|
|Formwork Plywood Standard||GB/T 17656-2018, PS 1-09, AS 6669, EN-13986|